www.kok66.com-澳门威尼99499网址

Contact us
WeChat

Manual Operated Glue Dispensing Machine

Current location:HOME>MD-2600 Silicone Glue Dispensing Machine

MD-2600 Silicone Glue Dispensing Machine

Principle Descriptionu Insert 2600ml package single component silicone into the barrel, glue will be pushed out by compressed air. Handhold glue valve control

 Principle Description

Insert 2600ml package single component silicone into the barrel, glue will be pushed out by compressed air. Handhold glue valve control the flow of glue by pressing or releasing the switch

Machine Feature

portable design with a small trolley, easy to move to different situation

Hand press switch control the glow flow based on requirement, easy to operate and save labor

Well performance of glue valve control, glue flow is stable and clean without leakage and tail

Flexible application on many lights, components gluing

Basic Parameters

Model

MD-2600

Dimension

45*25*85cm

weight

20KG

Working power

AC220V/50~60Hz/150W

Working pressure

0.4 ~ 0.6Mpa(no mist

Working temperature and Humidity

Temp:0 ~ 40  Humidity20 ~ 90%

 

Basic operation and maintenance

Make the air pressure is zero before opening barrel. Lock the cover tightly after filling the glue package

Remember to remove the cap and protective film before filling the glue package

Do not take out the glue package when stopping using the machine, otherwise the remaining glue inside the barrel will contact with air and get cure, then the pipe will be chocked

Remember to seal the glue nozzle with silicone oil if stop working

Try to check compressed air supply, nozzle, valve if glue flow is not stable

Try to replace seal rings inside the glue valve if the glue valve control performance is weakening

www.kok66.com|澳门威尼99499网址

XML 地图 | Sitemap 地图